





Replacement Battery 14Ah D-cell
- Regular price
- $20.00 USD
- Sale price
- $20.00 USD
- Regular price
-
- Unit price
- / per
- Water Rat
- Water Tank Level Monitor purchased in August 2024 or later
For all other Farmo products please purchase the Replacement 7Ah Battery Pack
- Long shelf life: Annual self discharge rate less than 1% at 25°C
- High energy density (700Wh/kg)
- Long operating life
- Stainless steel container and end caps
- Wide temperature range: -55ºC ~ +80ºC
- Hermetic glass-to-metal sealing
- Non-flammable electrolyte
- Compliant with IEC86-4 safety standard
- UL Component Recognition MH46165
- High and stable operating voltage
FREE SHIPPING for this item.
IMPORTANT!
When changing Water Rat Battery:
1. Use a clean and dry workbench
2. Clean the outside surface of the Water Rat before opening
3. Open carefully as the bottom and top parts are connected by the battery cable
4. Inspect and wipe clean the o-ring and the flat surface on lid it seals with
5. Wait 1 minute after removing old battery before putting in new battery
6. Tighten hex screws in alternate order like changing a car tyre
Thanks for your care when replacing the Water Rat battery.
If any issues, email us at: support@farmo.com.au


FAQs
1. Use a clean and dry workbench.
2. Clean the outside surface of the Water Rat before opening.
3. Open carefully as the bottom and top parts are connected by the battery cable.
4. Disconnect old battery from PCB.
5. Remove 2 screws securing battery strap and then remove battery.
6. Inspect and wipe clean the o-ring and the flat surface on the lid it seals with.
(Note: if the o-ring and surface is not clean, water will get inside and void your warranty).
7. Wait 1 minute after removing old battery before putting in new battery.
8. Fix battery strap and connect cable to PCB.
9. Tighten the hex screws in alternate order like changing a car tyre.
Give us a call on 1300 540 300 (Mon-Fri 9:00-17:00 AEST) or email support@farmo.com.au