A risk assessment must be completed and actioned before operating machinery remotely.
remote pump monitoring system
pump control systems
Digital Remote Pump Control
pump control
remote pump monitoring
remote pump control
remote pump monitoring system
pump control systems
Digital Remote Pump Control
pump control
remote pump monitoring
remote pump control
remote pump monitoring system
pump control systems
Digital Remote Pump Control
pump control
remote pump monitoring
remote pump control
Farmo

Remote Pump Controller

$677.59 USD
$677.59 USD
GST included.

Plug-and-play pump control — from anywhere.

The Farmo Remote Pump Controller is a smart, plug-in device that connects between your pump and a standard 240V single-phase power outlet.

Controlled through the Farmo App, it allows you to start or stop pumps remotely using schedules, tank levels, soil moisture, or a combination of triggers.

Farmers often pair it with a Farmo tank sensor to automate water movement — even across properties. Because both the controller and sensor are cloud-connected, they don’t need to be physically close and can operate hundreds of kilometres apart.

The Farmo Remote Pump Controller is plug and play DIY unit for 240V single phase power outlets. If you need to control something outside these parameters, check out our Remote Relay Switch which your electrician can install on any low-voltage starting circuit.

Assembly Instructions

$15 per device / month (ex GST)

Free Inclusions: The Farmo App | 3 users | Unlimited email alerts | 20x SMS alerts per device/month | Connectivity fees covered

Save up to 20% based on your organisation's total monthly spend

How to activate your new device

Control via App, schedule or data from other devices

Switch the pump on remotely and save time driving every day

Set scheduled times for when your pump switches on and off

Switch pumps on and off based on tank level thresholds to prevent water wastage

Plug and play - no wiring or battery required

Automate irrigation and tank filling

Improve water efficiency and save time

Your farm on the Farmo App
Product dimensions Clear enclosure 15cm Height x 20cm Width x 10cm Depth • Comms unit 10cm Height x 8cm Width x 4cm Depth
Sensor type Latching type relay
Capacity 240V 15A loads up to 2HP
Connectivity Cellular (NB-IoT/Cat-M1)
Network coverage required Yes. Telstra (default), Optus and international
Waterproof Enclosure - IP67, Cable Connections - No
Power source 240 > 24V DC 1A Power Supply Adapter
Subscription required Yes

Keep plugs clean and dry

Farmo devices are covered by a 12 month back-to-base warranty. After the standard warranty period expires we apply a pro-rata warranty up to 24 months.

FAQs

Yes, as long as there’s mobile network coverage (Telstra by default) the device will work. It’s built tough for use in remote or rugged farm conditions.

Controlled via the Farmo App, the Remote Pump Controller can be set to operate in the following modes:

  • Manual control: Start or stop pumps directly from the Farmo App
  • Scheduled control: Run pumps automatically on set schedules
  • Sensor-based control: Trigger pumps based on water tank levels or soil moisture
  • Combined triggers: Use a mix of conditions - for example, only run pumps when tank levels drop and it’s within a scheduled time window

All modes are fully configurable in the Farmo App, where you can also monitor real-time status and review historical data.

Yes - our detailed installation manual explains how the device works and guides you through setup. You can download it here: Download Installation Manual

You May Also Like